I made a quick guide on just how to seem wet the trunk lid for the 2016 Civic. This (together with a couple of various other audio deadener additions which I will publish overviews to later) has truly had a favorable influence on my stock sound system.
Follow me step by step:
Action 1: Get rid of the 9 clips that hold the material lining to the steel trunk lid. These clips have two side indentions that allow you bulge the center which will certainly launch the clip without damage. The lining needs to then pop off uncreative.
Step 2: Start purposefully adding your noise deadener of option. I purchased Noico (props to Bworks3) from Carid.
KEEP IN MIND: Be sure to not cover the holes used for clipping the interior item back on.
Care: Make certain that you remain inside the covering area of the textile for the very best appearance. (Notice on my last photo that I had to rise the bottom side due to the fact that I went to low.).
Caution: Be aware of the weight of the sound deadener you are adding. After 2 or 3 pieces I would certainly shut the trunk and resume it. Maintain doing this to make sure that you are not overwhelming the joints of the trunk lid.
Step 3: Rebuild! Those clips you eliminated earlier ought to click and lock the liner back right into location.
Action 1: Eliminate the 9 clips that hold the product lining to the metal trunk lid. Caution: Be mindful of the weight of the sound deadener you are adding. Keep doing this to make sure that you are not overwhelming the hinges of the trunk cover.